Feature selection and hyper parameters optimization for short-term wind power forecast

Applied Intelligence - Accurate wind power forecasting plays an increasingly significant role in power grid normal operation with large-scale wind energy. The precise and stable forecasting of wind...     

预应力碳纤维布加固钢筋再生混凝土梁受弯承载力研究

试验浇筑4组再生粗骨料掺量为0%、40%、70%、100%的钢筋再生混凝土梁,根据预应力碳纤维布拉断破坏和剥离破坏的界限加固量,每组对2根钢筋再生混凝土梁进行预裂破坏后,分别进行预应力碳纤维布一层和两层加固,然后对4组钢筋再生混凝土梁进行受弯承载力试验。试验表明：随着预应力碳纤维布加固量的增大,加固梁的受弯承载力增大,梁屈服时,纯弯段受拉区横向裂缝数量增多且宽度较小;随着再生粗骨料掺量的增大,加固梁受弯承载力降低,梁屈服时,裂缝数量减少、宽度增大。最后依据试验结果与平截面假定,结合再生粗骨料掺量对钢筋再生混凝土梁受弯承载力的影响,考虑钢筋再生混凝土梁的二次受力,建立了预应力碳纤维布加固钢筋再生混凝土梁的受弯承载力计算公式。计算结果表明：受弯承载力计算值与试验值吻合较好,可以为预应力碳纤维布加固钢筋再生混凝土梁设计提供参考。     

吉林省老龙口水库土坝坝体有限元计算分析

针对老龙口水库粘土心墙土石坝筑坝材料利用施工现场开挖料分区填筑和各分区材料性质相差较大以及坝体应力状态较复杂的特点,运用有限元软件计算分析坝体在竣工期和正常蓄水位工况下典型断面的应力分布规律,计算结果表明:粘土心墙应力与坝壳基本协调,应力满足设计要求。     

既有预应力混凝土空心板桥校核分析

依据现行新规范对既有预应力空心板桥进行了分析校核,计算出既有旧桥荷载横向分布系数,按照新规范进行荷载统计分析,求得各种工况下荷载组合情况,对空心板桥中的单梁按照规范进行复核验算,结果表明:不考虑空心板运营中强度等劣化时,其各项指标仍满足新规范要求可继续使用,因而,旧桥加宽改造时可根据桥梁实际运营情况和计算分析决定是否更换旧板,以节约资源。     

某抽水蓄能电站上库导流洞封堵设计

指出水电工程中导流洞封堵体稳定性对于电站蓄水发电和安全运行至关重要。在抗剪断理论的基础上采用水电工程上常用的计算方法对某水电站封堵体堵头进行计算并复核,分析并得出合理的堵头长度,从而得出其在安全运行上是可行的结论。     

预应力混凝土箱形倒虹吸管温度应力的有限元分析

运用ANSYS有限元热—结构耦合分析建立箱形倒虹吸管结构温度计算的模型,分析了温度应力对预应力混凝土箱形倒虹吸管的影响,得出当温度应力过大时,会造成倒虹吸管表面产生裂缝的结论,该成果对类似工程温度应力分析和温控具有一定借鉴意义。     

Grain-level statistical plasticity analysis on strain cycle fatigue of a FCC metal

The micromechanical strain cycle fatigue-life is systematically investigated by the micro-level numerical simulation, compared with symmetrical strain cycle experiments of copper, focusing on the characteristics of polycrystalline aggregation and the mechanism of microscale plastic deformation. A methodology to predict the low-cycle fatigue life by micro-level simulation along with statistical analysis is proposed through the following steps: (1) A crystal plasticity model is developed based on the nonlinear kinematic hardening mechanism of crystal slipping system. This model is applied to the calculations of crystal grain interior stresses and plastic strains. (2) A statistical representative volume element (SRVE) is constructed for a pure copper as a material model which features a polycrystalline Voronoi aggregation consisting of a number of crystal grains. This SRVE can be used for statistical analysis of the material inhomogeneous stresses and strains during cycle loading. (3) The simulations are performed to model the experimental cycle evolution of strain fatigue by using the SRVE under the symmetrical tensile–compressive loading. (4) Statistical and micromechanical analyses are carried out for the inhomogeneous interior stresses and strains of the SRVE of the polycrystalline copper in the low cycle regime. The resulting analysis can render the microscale interpretation and numerical simulation for the low-cycle fatigue evolution accordingly.     

移动通信基站建设的环保管理

简要介绍了河南省移动通信基站建设环保管理存在的问题,详细阐述了产生问题的主要原因及解决问题的基本思路和办法。